Seagate GoFlex Home Status Page

Processor Speed : 1.2 GHz
model name : Feroceon 88FR131 rev 1 (v5l) Features : swp half thumb fastmult edsp CPU implementer : 0x56 CPU architecture: 5TE CPU variant : 0x2 CPU part : 0x131 CPU revision : 1 Hardware : Seagate GoFlex Home GPU Mem Split : No GPU has been detected

MemTotal: 121448 kB MemFree: 6452 kB MemAvailable: 92120 kB Buffers: 29700 kB Cached: 47184 kB SwapCached: 768 kB Active: 39328 kB Inactive: 52812 kB Active(anon): 2560 kB Inactive(anon): 13012 kB Active(file): 36768 kB Inactive(file): 39800 kB Unevictable: 0 kB Mlocked: 0 kB SwapTotal: 1048572 kB SwapFree: 1046148 kB Dirty: 40 kB Writeback: 0 kB AnonPages: 14580 kB Mapped: 13420 kB Shmem: 316 kB Slab: 18540 kB SReclaimable: 14320 kB SUnreclaim: 4220 kB KernelStack: 608 kB PageTables: 824 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 1109296 kB Committed_AS: 65700 kB VmallocTotal: 892928 kB VmallocUsed: 5604 kB VmallocChunk: 884372 kB

total used free shared buffers cached Mem: 121448 115036 6412 324 29700 47192 -/+ buffers/cache: 38144 83304 Swap: 1048572 2424 1046148

kB process
8044 php-fpm: pool www 7788 /usr/local/citadel/citserver -d -l syslog 6960 php-fpm: pool www 6616 php-fpm: pool www 4428 php-fpm: master process (/etc/php/php-fpm.conf) 4200 /usr/local/webcit/webcit -d -p 8888 -f 3532 /usr/bin/syslog-ng -F 3152 /sbin/init 3136 wget http://127.0.0.1/indexgen.php -q -F -O /tmp/index.tmp 2924 nginx: worker process

%CPU NI S TIME COMMAND 4.0 0 S 01:33:48 /usr/local/citadel/citserver -d -l syslog 1.0 0 S 00:00:00 wget http://127.0.0.1/indexgen.php -q -F -O /tmp/index.tmp 1.0 0 S 00:06:35 php-fpm: pool www 1.0 0 S 01:49:22 php-fpm: pool www 1.0 0 S 01:50:31 php-fpm: pool www 0.4 0 S 00:51:13 /bin/bash /usr/share/driveactivity.sh 0.2 0 S 00:25:14 [rcu_preempt] 0.1 0 S 00:16:37 [ksoftirqd/0] 0.1 0 S 00:16:59 nginx: worker process 0.1 0 S 00:18:37 /bin/bash /usr/share/phpcache.sh

Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 110G 15G 96G 13% / devtmpfs devtmpfs 60M 0 60M 0% /dev tmpfs tmpfs 60M 0 60M 0% /dev/shm tmpfs tmpfs 60M 256K 60M 1% /run tmpfs tmpfs 60M 0 60M 0% /sys/fs/cgroup tmpfs tmpfs 60M 148K 60M 1% /tmp /dev/sda2 ext3 18M 6.6M 10M 40% /boot
rootfs fstab:
/dev/sda1 / ext4 rw,noatime,data=writeback,barrier=0,nobh,errors=remount-ro 0 1
Journal Data Writeback = ENABLED (tune2fs -o journal_data_writeback /dev/sda1)

ethact=egiga0
baudrate=115200
mainlineLinux=yes
console=ttyS0,115200
led_init=green blinking
led_exit=green off
led_error=orange blinking
mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data)
mtdids=nand0=orion_nand
partition=nand0,2
stdin=serial
stdout=serial
stderr=serial
rescue_installed=0
rescue_set_bootargs=setenv bootargs console=$console ubi.mtd=2 root=ubi0:rootfs ro rootfstype=ubifs $mtdparts $rescue_custom_params
rescue_bootcmd=if test $rescue_installed -eq 1; then run rescue_set_bootargs; nand read.e 0x800000 0x100000 0x400000; bootm 0x800000; else run pogo_bootcmd; fi
pogo_bootcmd=if fsload uboot-original-mtd0.kwb; then go 0x800200; fi
force_rescue=0
force_rescue_bootcmd=if test $force_rescue -eq 1 || ext2load usb 0:1 0x1700000 /rescueme 1 || fatload usb 0:1 0x1700000 /rescueme.txt 1; then run rescue_bootcmd; fi
ubifs_mtd=3
ubifs_set_bootargs=setenv bootargs console=$console ubi.mtd=$ubifs_mtd root=ubi0:rootfs rootfstype=ubifs $mtdparts $ubifs_custom_params
ubifs_bootcmd=run ubifs_set_bootargs; if ubi part data && ubifsmount rootfs && ubifsload 0x800000 /boot/uImage && ubifsload 0x1100000 /boot/uInitrd; then bootm 0x800000 0x1100000; fi
usb_scan=usb_scan_done=0;for scan in $usb_scan_list; do run usb_scan_$scan; if test $usb_scan_done -eq 0 && ext2load usb $usb 0x800000 /boot/uImage 1; then usb_scan_done=1; echo "Found bootable drive on usb $usb"; setenv usb_device $usb; setenv usb_root /dev/$dev; fi; done
usb_scan_list=1 2 3 4
usb_scan_1=usb=0:1 dev=sda1
usb_scan_2=usb=1:1 dev=sdb1
usb_scan_3=usb=2:1 dev=sdc1
usb_scan_4=usb=3:1 dev=sdd1
usb_init=run usb_scan
usb_device=0:1
usb_root=/dev/sda1
usb_rootfstype=ext2
usb_rootdelay=10
usb_set_bootargs=setenv bootargs console=$console root=$usb_root rootdelay=$usb_rootdelay rootfstype=$usb_rootfstype $mtdparts $usb_custom_params
usb_bootcmd=run usb_init; run usb_set_bootargs; run usb_boot
usb_boot=mw 0x800000 0 1; ext2load usb $usb_device 0x800000 /boot/uImage; if ext2load usb $usb_device 0x1100000 /boot/uInitrd; then bootm 0x800000 0x1100000; else bootm 0x800000; fi
usb_custom_params=ignore_loglevel netconsole=6665@10.10.10.3/eth0,6666@10.10.10.4/
arcNumber=3338
sata_root=/dev/sda1
sata_rootfstype=ext3
sata_rootdelay=10
sata_bootcmd=run sata_set_bootargs; run sata_boot
bootcmd=run sata_bootcmd; usb start; run force_rescue_bootcmd; run ubifs_bootcmd; run usb_bootcmd; usb stop; run rescue_bootcmd; run pogo_bootcmd; reset
ncip=10.10.10.5
ncipk=10.10.10.4
serverip=10.10.10.3
preboot=run nc_test nc_start
nc_test=ping $ncip
nc_start=setenv stdin nc; setenv stdout nc; setenv stderr nc; version
sata_custom_params=ignore_loglevel netconsole=6665@10.10.10.3/eth0,6666@10.10.10.4/
ethaddr=00:10:75:2A:41:D7
ipaddr=10.10.10.6
bootdelay=3
sata_device=0:2
sata_kernel=/uImage
sata_initrd=/uInitrd
sata_boot=ide reset; mw 0x800000 0 1; ext2load ide $sata_device 0x800000 $sata_kernel; if ext2load ide $sata_device 0x1100000 $sata_initrd; then bootm 0x800000 0x1100000; else bootm 0x800000; fi
sata_set_bootargs=setenv bootargs console=$console root=$sata_root rootdelay=$sata_rootdelay $mtdparts $sata_custom_params

MemTotal: 121448 kB MemFree: 6452 kB MemAvailable: 92120 kB Buffers: 29700 kB Cached: 47184 kB SwapCached: 768 kB Active: 39328 kB Inactive: 52812 kB Active(anon): 2560 kB Inactive(anon): 13012 kB Active(file): 36768 kB Inactive(file): 39800 kB Unevictable: 0 kB Mlocked: 0 kB SwapTotal: 1048572 kB SwapFree: 1046148 kB Dirty: 40 kB Writeback: 0 kB AnonPages: 14580 kB Mapped: 13420 kB Shmem: 316 kB Slab: 18540 kB SReclaimable: 14320 kB SUnreclaim: 4220 kB KernelStack: 608 kB PageTables: 824 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 1109296 kB Committed_AS: 65700 kB VmallocTotal: 892928 kB VmallocUsed: 5604 kB VmallocChunk: 884372 kB	Current total CPU load: 8.9%
	Current rootfs iozone performance (MB/sec, 1GB file): SanDisk Extreme SSD 120GB SATA3 #SDSSDX-120G-G25
MEMORY USAGE (kB) total used free shared buffers cached Mem: 121448 115036 6412 324 29700 47192 -/+ buffers/cache: 38144 83304 Swap: 1048572 2424 1046148
TOP 10 MEMORY HOGS kB process 8044 php-fpm: pool www 7788 /usr/local/citadel/citserver -d -l syslog 6960 php-fpm: pool www 6616 php-fpm: pool www 4428 php-fpm: master process (/etc/php/php-fpm.conf) 4200 /usr/local/webcit/webcit -d -p 8888 -f 3532 /usr/bin/syslog-ng -F 3152 /sbin/init 3136 wget http://127.0.0.1/indexgen.php -q -F -O /tmp/index.tmp 2924 nginx: worker process
TOP 10 CPU HOGS %CPU NI S TIME COMMAND 4.0 0 S 01:33:48 /usr/local/citadel/citserver -d -l syslog 1.0 0 S 00:00:00 wget http://127.0.0.1/indexgen.php -q -F -O /tmp/index.tmp 1.0 0 S 00:06:35 php-fpm: pool www 1.0 0 S 01:49:22 php-fpm: pool www 1.0 0 S 01:50:31 php-fpm: pool www 0.4 0 S 00:51:13 /bin/bash /usr/share/driveactivity.sh 0.2 0 S 00:25:14 [rcu_preempt] 0.1 0 S 00:16:37 [ksoftirqd/0] 0.1 0 S 00:16:59 nginx: worker process 0.1 0 S 00:18:37 /bin/bash /usr/share/phpcache.sh
DRIVE USAGE Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 110G 15G 96G 13% / devtmpfs devtmpfs 60M 0 60M 0% /dev tmpfs tmpfs 60M 0 60M 0% /dev/shm tmpfs tmpfs 60M 256K 60M 1% /run tmpfs tmpfs 60M 0 60M 0% /sys/fs/cgroup tmpfs tmpfs 60M 148K 60M 1% /tmp /dev/sda2 ext3 18M 6.6M 10M 40% /boot rootfs fstab: /dev/sda1 / ext4 rw,noatime,data=writeback,barrier=0,nobh,errors=remount-ro 0 1 Journal Data Writeback = ENABLED (tune2fs -o journal_data_writeback /dev/sda1)
DRIVE ACTIVITY Device: tps kB_read/s kB_wrtn/s sda 2.02 0.00 20.20
USB DEVICES Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
CMDLINE console=ttyS0,115200 root=/dev/sda1 rootdelay=10 mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data) ignore_loglevel netconsole=6665@10.10.10.3/eth0,6666@10.10.10.4/
UBOOT fw_printenv ethact=egiga0 baudrate=115200 mainlineLinux=yes console=ttyS0,115200 led_init=green blinking led_exit=green off led_error=orange blinking mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data) mtdids=nand0=orion_nand partition=nand0,2 stdin=serial stdout=serial stderr=serial rescue_installed=0 rescue_set_bootargs=setenv bootargs console=$console ubi.mtd=2 root=ubi0:rootfs ro rootfstype=ubifs $mtdparts $rescue_custom_params rescue_bootcmd=if test $rescue_installed -eq 1; then run rescue_set_bootargs; nand read.e 0x800000 0x100000 0x400000; bootm 0x800000; else run pogo_bootcmd; fi pogo_bootcmd=if fsload uboot-original-mtd0.kwb; then go 0x800200; fi force_rescue=0 force_rescue_bootcmd=if test $force_rescue -eq 1 \|\| ext2load usb 0:1 0x1700000 /rescueme 1 \|\| fatload usb 0:1 0x1700000 /rescueme.txt 1; then run rescue_bootcmd; fi ubifs_mtd=3 ubifs_set_bootargs=setenv bootargs console=$console ubi.mtd=$ubifs_mtd root=ubi0:rootfs rootfstype=ubifs $mtdparts $ubifs_custom_params ubifs_bootcmd=run ubifs_set_bootargs; if ubi part data && ubifsmount rootfs && ubifsload 0x800000 /boot/uImage && ubifsload 0x1100000 /boot/uInitrd; then bootm 0x800000 0x1100000; fi usb_scan=usb_scan_done=0;for scan in $usb_scan_list; do run usb_scan_$scan; if test $usb_scan_done -eq 0 && ext2load usb $usb 0x800000 /boot/uImage 1; then usb_scan_done=1; echo "Found bootable drive on usb $usb"; setenv usb_device $usb; setenv usb_root /dev/$dev; fi; done usb_scan_list=1 2 3 4 usb_scan_1=usb=0:1 dev=sda1 usb_scan_2=usb=1:1 dev=sdb1 usb_scan_3=usb=2:1 dev=sdc1 usb_scan_4=usb=3:1 dev=sdd1 usb_init=run usb_scan usb_device=0:1 usb_root=/dev/sda1 usb_rootfstype=ext2 usb_rootdelay=10 usb_set_bootargs=setenv bootargs console=$console root=$usb_root rootdelay=$usb_rootdelay rootfstype=$usb_rootfstype $mtdparts $usb_custom_params usb_bootcmd=run usb_init; run usb_set_bootargs; run usb_boot usb_boot=mw 0x800000 0 1; ext2load usb $usb_device 0x800000 /boot/uImage; if ext2load usb $usb_device 0x1100000 /boot/uInitrd; then bootm 0x800000 0x1100000; else bootm 0x800000; fi usb_custom_params=ignore_loglevel netconsole=6665@10.10.10.3/eth0,6666@10.10.10.4/ arcNumber=3338 sata_root=/dev/sda1 sata_rootfstype=ext3 sata_rootdelay=10 sata_bootcmd=run sata_set_bootargs; run sata_boot bootcmd=run sata_bootcmd; usb start; run force_rescue_bootcmd; run ubifs_bootcmd; run usb_bootcmd; usb stop; run rescue_bootcmd; run pogo_bootcmd; reset ncip=10.10.10.5 ncipk=10.10.10.4 serverip=10.10.10.3 preboot=run nc_test nc_start nc_test=ping $ncip nc_start=setenv stdin nc; setenv stdout nc; setenv stderr nc; version sata_custom_params=ignore_loglevel netconsole=6665@10.10.10.3/eth0,6666@10.10.10.4/ ethaddr=00:10:75:2A:41:D7 ipaddr=10.10.10.6 bootdelay=3 sata_device=0:2 sata_kernel=/uImage sata_initrd=/uInitrd sata_boot=ide reset; mw 0x800000 0 1; ext2load ide $sata_device 0x800000 $sata_kernel; if ext2load ide $sata_device 0x1100000 $sata_initrd; then bootm 0x800000 0x1100000; else bootm 0x800000; fi sata_set_bootargs=setenv bootargs console=$console root=$sata_root rootdelay=$sata_rootdelay $mtdparts $sata_custom_params
Source for this page available HERE. Requires additional software, see the README for details.